How does a capacitor behave when connected in series or parallel?

Determine the anode current I_A of an SCR when the gate current I_G = 0. Given that (α₁ + α₂) = 0.58 and (I_CO1 + I_CO2) = 1 mA.

Calculate the output common-mode voltage when the CMRR is 60 dB, the input common-mode voltage is 15 V, and the differential voltage gain is 2000.

What change can be seen in the output resistance of a Series-Shunt Amplifier with the introduction of feedback?

If both the emitter-base junction and collector-base junction of a transistor are forward biased, then the transistor is in which mode of operation?

In a Class A amplifier, the maximum collector-emitter voltage (Vce(max)) is 15 V, and the minimum collector-emitter voltage (Vce(min)) is 1 V. Calculate the overall efficiency for a series-fed load.

What is the value of input resistance of a Darlington amplifier in a self-bias network, if the biasing resistances are 180 kΩ and 350 kΩ, the value of hfe = 40, and the emitter resistance = 8 kΩ?

What is the role of input capacitance in a transistor amplifying circuit?

What is the voltage gain of an RC coupled common source JFET amplifier without bypass capacitor when the transconductance (g_m) is 2 mS, the drain resistance (R_d) is 10 kΩ, the source resistance (R_s) is 3 kΩ, and the load resistance (R_L) is 8 kΩ?

Assertion (A): A p-n junction has high resistance in the reverse direction.

Reason (R): When a reverse bias is applied to a p-n junction, the width of the depletion layer increases.