Jobs By Abekus

Concrete-structures Questions Set 14:

Quiz Mode

Solution:

In two way slab the bending is

Dominant

Predominant

Post dominent

None

Solution:

Bond stress is which type of stress in concrete

Compressive

Tensile

Shear

Axial

Solution:

Which of the following is the modern method of design?

Working stress method

Ultimate load method

Limit State method

None

Solution:

In RCC structure anchorage length is also called as

Development length

Maximum length

Minimum length

Non development length

Solution:

In limit state design method of concrete structures, the recommended partial material safety factor (γ_m) for steel according to IS: 456-2000 is

1.5

1.15

1.00

0.87

Solution:

Why limit state method is better than working stress method?

Ultimate strength is failure criteria

It is better to understand

It is easy to use

The failure load not matches with experimental results

Solution:

Which of the following length is in bar is required to provide beyond a section so that Bond force develope bond between bar and concrete

Development length

Shear length

Axial length

None of the above

Solution:

A column with dimensions 450mm x 600mm has 8 bars, 4 of which have a diameter of 16mm and the remaining 4 have a diameter of 20mm. Calculate the diameter and spacing of the lateral ties.

5mm, 256mm

6mm, 300mm

6mm, 256mm

5mm, 300mm

Solution:

A simply supported prismatic concrete beam of rectangular cross-section, having a span of 8m, is prestressed with an effective prestressing force 600 kN. The eccentricity of the prestressing tendon is zero at supports and varies linearly to a value of e at mid span. In order to balance an external concentrated load of 12 kN applied at the mid span, the required value of e (in mm, round off to the nearest integer) of the tendon, is ______.

Concrete-structures Questions Set 14:

Solution:

In two way slab the bending is

Solution:

Bond stress is which type of stress in concrete

Solution:

Which of the following is the modern method of design?

Solution:

In RCC structure anchorage length is also called as

Solution:

In limit state design method of concrete structures, the recommended partial material safety factor (γ_m) for steel according to IS: 456-2000 is

Solution:

Why limit state method is better than working stress method?

Solution:

Which of the following length is in bar is required to provide beyond a section so that Bond force develope bond between bar and concrete

Solution:

A column with dimensions 450mm x 600mm has 8 bars, 4 of which have a diameter of 16mm and the remaining 4 have a diameter of 20mm. Calculate the diameter and spacing of the lateral ties.

Solution:

Solution:

Related Question Sets:

Related Topics:

Concrete-structures Questions Set 14:

Solution:

In two way slab the bending is

Solution:

Bond stress is which type of stress in concrete

Solution:

Which of the following is the modern method of design?

Solution:

In RCC structure anchorage length is also called as

Solution:

In limit state design method of concrete structures, the recommended partial material safety factor (γm) for steel according to IS: 456-2000 is

Solution:

Why limit state method is better than working stress method?

Solution:

Which of the following length is in bar is required to provide beyond a section so that Bond force develope bond between bar and concrete

Solution:

A column with dimensions 450mm x 600mm has 8 bars, 4 of which have a diameter of 16mm and the remaining 4 have a diameter of 20mm. Calculate the diameter and spacing of the lateral ties.

Solution:

Solution:

Related Question Sets:

Related Topics:

In limit state design method of concrete structures, the recommended partial material safety factor (γ_m) for steel according to IS: 456-2000 is