Jobs By Abekus

Strength-of-materials Questions Set 1:

Quiz Mode

A number of forces acting at a point will be in equilibrium if

Solution:

Which material type has a post-elastic strain greater than 5%?

Brittle

Ductile

Plastic

Fragile

Solution:

Which of the following is not a type of cross drainage work?

Super passage

Aqueduct

Level crossing

Head regulator

Solution:

When the temperature of a body is raised, what is developed?

Thermal stress

Thermal deflection

Thermal contraction

Thermal strain

Solution:

The creep strains are

caused due to dead loads only

caused due to live loads only

caused due to both dead loads and live loads

Independent of loads

Solution:

Calculate the slope at the supports if the area is 180 kNm² and the flexural rigidity is 50,000.

0.0054 radians

0.108 radians

0.0036 radians

0.0072 radians

Solution:

A rod of 4 m is heated to 60°C and fixed at both ends. Calculate the thermal stress in the rod. (Take α = 10 x 10^-6 /°C and E = 200 x 10³ MPa)

120 MPa

80 MPa

100 MPa

150 MPa

Solution:

A rod of cross-section area A and length L, made of a material with modulus of elasticity E, is subjected to an axial load W. What is the strain energy stored in the rod?

W²L/4AE

WL/2AE

W²L/2AE

AE/2WL

Solution:

A rope with a diameter of 2 cm can withstand a maximum tension of 600 N before breaking. Find the maximum tension that can be applied to a similar rope with a diameter of 4 cm.

2000 N

1800 N

2400 N

3000 N

Solution:

If the effective length of a column is twice the actual length, then which of the following is true?

the column is fixed at one end and free at the other end.

the column is hinged at both the ends.

the column is fixed at one end and hinged at the other end.

the column is fixed at both the ends.

Strength-of-materials Questions Set 1:

A number of forces acting at a point will be in equilibrium if

Solution:

Which material type has a post-elastic strain greater than 5%?

Solution:

Which of the following is not a type of cross drainage work?

Solution:

When the temperature of a body is raised, what is developed?

Solution:

The creep strains are

Solution:

Calculate the slope at the supports if the area is 180 kNm² and the flexural rigidity is 50,000.

Solution:

A rod of 4 m is heated to 60°C and fixed at both ends. Calculate the thermal stress in the rod. (Take α = 10 x 10^-6 /°C and E = 200 x 10³ MPa)

Solution:

A rod of cross-section area A and length L, made of a material with modulus of elasticity E, is subjected to an axial load W. What is the strain energy stored in the rod?

Solution:

A rope with a diameter of 2 cm can withstand a maximum tension of 600 N before breaking. Find the maximum tension that can be applied to a similar rope with a diameter of 4 cm.

Solution:

If the effective length of a column is twice the actual length, then which of the following is true?

Solution:

Related Question Sets:

Related Topics:

Strength-of-materials Questions Set 1:

A number of forces acting at a point will be in equilibrium if

Solution:

Which material type has a post-elastic strain greater than 5%?

Solution:

Which of the following is not a type of cross drainage work?

Solution:

When the temperature of a body is raised, what is developed?

Solution:

The creep strains are

Solution:

Calculate the slope at the supports if the area is 180 kNm2 and the flexural rigidity is 50,000.

Solution:

A rod of 4 m is heated to 60°C and fixed at both ends. Calculate the thermal stress in the rod. (Take α = 10 x 10-6 /°C and E = 200 x 103 MPa)

Solution:

A rod of cross-section area A and length L, made of a material with modulus of elasticity E, is subjected to an axial load W. What is the strain energy stored in the rod?

Solution:

A rope with a diameter of 2 cm can withstand a maximum tension of 600 N before breaking. Find the maximum tension that can be applied to a similar rope with a diameter of 4 cm.

Solution:

If the effective length of a column is twice the actual length, then which of the following is true?

Solution:

Related Question Sets:

Related Topics:

Calculate the slope at the supports if the area is 180 kNm² and the flexural rigidity is 50,000.

A rod of 4 m is heated to 60°C and fixed at both ends. Calculate the thermal stress in the rod. (Take α = 10 x 10^-6 /°C and E = 200 x 10³ MPa)