Structural-analysis Questions Set 11:
How many constraints are there in a fixed support in 2D and 3D?
Solution:
The displacement method is also known as
Solution:
The Müller-Breslau principle is used to obtain the influence line for redundant structures.
Solution:
In slope defection equations, deformations are caused due to
Solution:
For stable structures, elements on the main diagonal of the flexibility and stiffness matrices must be positive and positive, respectively.
Solution:
A statically determinate structure is the one which
Solution:
A cantilever beam carries a load P uniformly distributed over its entire length.
If the same load is placed at the free end of the same cantilever, then the ratio of the maximum deflection in the first case to that in the second case will be:
Solution:
Which diagram shows the variation of a function (reaction, shear force, bending moment, or axial force) on a structure at any given point due to the application of load?
Solution:
In a statically determinate structure,
Solution:
A delicate instrument which weighs 450 N is to be spring mounted to the floor of a test slab which occasionally vibrates with a frequency of 10Hz and maximum amplitude of 2.5mm. Determine the stiffness of the isolation spring required to reduce the vertical amplitude of the instrument to 0.025mm if the instrument is isolated with dampness with a damping ratio of 2%
mention the answer till two digit after decimal with rounging off
Solution:
Related Question Sets:
Related Topics:
Scroll to Top
