Computer-integrated-manufacturing Questions Set 1:
Which of the following CAD software does not have integrated CAM functionality?
Solution:
What is the full form of MJS?
Solution:
A grinding wheel is said to be of soft grade if the abrasive grains can be easily dislodged.
Solution:
Numerical Control (NC) contouring is a type of:
Solution:
What type of rapid prototyping (RP) technology is Selective Laser Sintering (SLS)?
Solution:
In a CNC feed drive, a stepper motor with a step angle of 1.8 degrees drives a lead screw with a pitch of 2 mm. The basic length unit (BLU) for this drive (in microns) is:
Solution:
What is the process in which the detailed specifications of materials, dimensions, tolerances, and surface roughness are defined?
Solution:
A stepper motor has 150 steps. The output shaft of the motor is directly coupled to a lead screw of pitch 4 mm, which drives a table. If the frequency of pulse supply to the motor is 200 Hz, the speed of the table (in mm/min) is
Solution:
The work table in an NC positioning system is driven by a lead screw with a pitch of 3 mm. The stepping motor has a step angle of 250 steps. What is the pulse rate (in pulses per minute) required to achieve a worktable speed of 300 mm/min?
Solution:
The correct G and N codes for the motion in an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) along a circular path with center at (5, 2). Before starting the operation, the tool is at (5, 4).
Solution:
Related Question Sets:
Related Topics:
Scroll to Top
