450+ Construction-materials-and-management Questions

Construction-materials-and-management Questions Set 25:

Quiz Mode

What is the typical range of fineness modulus of sand?

0.5 - 1

1 - 2

2 - 3

2.5 - 3.5

Solution:

Which type of resin is most commonly used in commercial varnishes?

Alkyd

Phenolic

Polyurethane

Satin Gloss

Solution:

In colored cement, which of the following additives gives the green color?

Cobalt

Chromium oxide

Iron oxide

Titanium oxide

Solution:

In which type of wall is stretcher bond possible?

Wall of any thickness

Half-brick wall

One-brick wall

One-and-a-half-brick wall

Solution:

The angle between the grains of any layer and the adjacent layers in plywood is typically

0 degrees

30 degrees

45 degrees

90 degrees

Solution:

The type of cement prepared by reducing the amounts of C3S and C3A is

Rapid hardening cement

Low heat cement

Sulphate resisting cement

Ordinary Portland cement

Solution:

Which of the following tests is used to determine the flowability of self-compacting concrete?

J-Ring test

Slump Flow Test

Compaction Factor Test

Workability Test

Solution:

Why is timber generally preferred for buildings in earthquake-prone regions?

it can be easily handled

it combines light weight with strength

it is easy to provide connection in timber

all of the above

Solution:

The average load acting on a structure is 25 kN/m, and the standard deviation of the load occurrence is 2.4. What is the characteristic load on the structure as per the limit state of collapse?

23.8 kN/m

25.4 kN/m

27.2 kN/m

28.9 kN/m

Solution:

Which of the following line is usually parallel to the plot boundaries and laid down in each case by the Authority, beyond which nothing can be constructed towards the site boundaries?

Property line

Building line

Plot line

Control line

Solution:

Related Question Sets:

Construction-materials-and-management Questions Set 26

Construction-materials-and-management Questions Set 27

Construction-materials-and-management Questions Set 28

Construction-materials-and-management Questions Set 29

Construction-materials-and-management Questions Set 30

Construction-materials-and-management Questions Set 31

Construction-materials-and-management Questions Set 32

Construction-materials-and-management Questions Set 33

Construction-materials-and-management Questions Set 34

Construction-materials-and-management Questions Set 35

Construction-materials-and-management Questions Set 25:

What is the typical range of fineness modulus of sand?

Solution:

Which type of resin is most commonly used in commercial varnishes?

Solution:

In colored cement, which of the following additives gives the green color?

Solution:

In which type of wall is stretcher bond possible?

Solution:

The angle between the grains of any layer and the adjacent layers in plywood is typically

Solution:

The type of cement prepared by reducing the amounts of C3S and C3A is

Solution:

Which of the following tests is used to determine the flowability of self-compacting concrete?

Solution:

Why is timber generally preferred for buildings in earthquake-prone regions?

Solution:

The average load acting on a structure is 25 kN/m, and the standard deviation of the load occurrence is 2.4. What is the characteristic load on the structure as per the limit state of collapse?

Solution:

Which of the following line is usually parallel to the plot boundaries and laid down in each case by the Authority, beyond which nothing can be constructed towards the site boundaries?

Solution:

Related Question Sets:

Related Topics: