Machining-and-machine-tool-operations Questions Set 22:
Which of the following is an example of a non-cutting shaping process?
Solution:
Which of the following materials is not used as an abrasive in ultrasonic machining?
Solution:
Nose wear on a cutting tool occurs due to friction between the tool and which other element?
Solution:
A milling cutter having 8 teeth is rotating at 150 rpm. If the feed per tooth is 0.1 mm, what is the value of the table speed in mm/min?
Solution:
Which of the following tool features is most useful for increasing tool life, compared to improving surface finish?
Solution:
Estimate the blanking force required to cut a blank 25 mm wide and 30 mm long from a 1 mm thick metal strip if the ultimate shear stress of the material is 450 N/mm².
Solution:
For the EMF (Electromagnetic Forming) process, the resistivity of the workpiece material should be:
Solution:
During ultrasonic machining (USM), electrical energy is converted into mechanical vibrations.
Solution:
In the selection of optional cutting conditions, the requirement of desired surface finish would put a limit on which of the following?
Solution:
In a single point turning tool, the side rake angle and orthogonal rake angle are equal. φ is the principal cutting edge angle and its range is 0° ≤ φ ≤ 90°. The chip flows in the orthogonal plane. The value of φ (in degrees) that is closest to:
Solution:
Related Question Sets:
Related Topics:
Scroll to Top
